CNC H5

Product detailed description

Technical parameters:
Step / Dir system, LPT port, stepping motor drive,
4D (four motors), compact design,
2-phase, bipolar, micro-step control,
Adjustable microkrok: 1; 1.2; 1.8; 1/16,
Load capacity per phase max. DC 35V, 3.5A,
Quiet operation,
100kHz - max. Jog frequency.
4-stage current setting,
5 inputs,
1 relay (max. 230 V, 3 A
Power supply from a single source (integrated switching power supply for digit. Part)
Protection against overheating
 
Use software:
Mach3 CNC (Win. 2000 / XP recommended)
and other Settable with pins on the LPT port.

For each output it can be connected to a motor. The involvement of several motors to one output is not recommended! 5 inputs can be connected either switches or inductive sensors and the like. The inputs are protected by diodes and 1 kOhm - ew resistor. The relay outputs can be controlled switching engine machining. For larger performance auxiliary relay is recommended. The communication between the PC board is used and the current cable LPT. It is advisable to use better and not too long.
The driver needs only one power supply to the motor and the source from which you then need to adjust your other voltage levels. The driver must be cooled ideal is to use a 24V AC - AC fan and connect it directly to the transformer.